1996 & up ZX7R Carb Kit

Part # 7R-9603...$120.00 For off road use only

This kit is the result of 3 months of combined testing. It is designed for use with either the stock header with ANY slip-on or any aftermarket exhaust system.

The needles included in this kit have 6 angles ground on them. After 3 months of development, these were the final design chosen. This is due to the fact that performance decreased when any change was made to them.

You can expect perfect closed to part throttle response and the common low rpm dead spot removed.

This kit needs to be used with a stock airbox and filter - no performance increase was shown with an aftermarket filter.

This kit will provide a noticable increase in throttle response and midrange power

This kit will give shorter warm-up time and greatly reduced engine vibration.

This kit is designed to be as user frendly as possible, you will get it right the first time.

* Note - We do not use the stock needles like some other kits- this gave a much less than satisfactory throttle response and power.

To make this bike run the way that it should..... we did the R+D on the needles (6 angles) to make it run it's best.  You get the throttle response that you should get - Instant !!